1.The equipment is with accurate controlling process and high level mechanic designing, which is simple to operate and runs stably.
2.Equipped with water cooling rasp and automatic blades renew device. The blades can be used with 80% more working endu rance.
3.The buffing quality can be proved more stable in accordance ofthe working of automatic belt measuring device.
4.Casing drove by expandable rim, in order to ensure dynamic performance ofthe retread tires.
1. Exhaust and dust removal system
2. Taper and needle-nosed pliers (cut the leaking wire)
3. Tire marking chalk (mark the location of the wound, tread width, etc.)
4. Lubricating agent of expansion wheel (apply regularly)
5. Tire parameter table (input PC configuration table in advance, and call it out directly when polishing)
6. Tread base measuring ruler/pattern depth meter/flexible tape measure (can be used for phased detection)
7. RMA standard grinding roughness template (used to judge the wear of grinding tool head)
8. Goggles with side protection
9.Safety shoes
1.Compressed air pressure: 5 ~ 8kg/cm
2.Tire inflation pressure: 1.5kg /cm2.
1.Before buffing， eliminate the visible foreign matter, including stone, nails, screws, etc.
2.inflatable no more than 15 psi (1.5 Kg/cm2).
3. labor protection glasses
4. not allowed to wear gloves and wear comfortable clothes
5.long hair must be bandaged up
Please refer to the manual grinding machine equipment, understand any security problems.
1. Safe production;
2. process standardization, efficiency maximization, production of fine Retreading tires.